Surfing Marking MB

Application

Surface Marking MB is ideal for large-area markings, e.g. for electric vehicle parking spaces* in outdoor areas.
Degree of stress: Up to medium stress.
Suitable substrates: Bituminous floors (melted asphalt, asphalt concrete), concrete and cement floors.

*For application to electric cars, use an existing template or one of ours (electric car item no. 40-6-7).

Product properties

» Quick-drying
» High coverage
» Elastic
» Clearly visible
» Long range
» Suitable for forklift traffic
» Slip resistance class R11 (Construction see Slip resistance/Wet area page 6)

Drying

(23°C, 60% relative humidity)
Can be painted over after approx. 1 hour
Fully loadable after drying: after 24 hours

The drying time depends on the wet film thickness, temperature, humidity and the material and ceiling temperature. Only open the roadways to traffic after the contractor has checked that they are completely dry.

Spreading rate

Approx. 0.6 kg/m² for average consumption.

Actual consumption depends on the applied layer thickness, the application method and the nature of the substrate.

For more information, see the technical data sheet.

Type of application

Jansen Surface Marking MB must be stirred until homogeneous before use. Ensure that the material is evenly distributed over the entire application area.

Shade

Traffic blue RAL 5017
Yellow-green RAL 6018
Standard RAL colours on request

Field of application

Roller: Lambskin roller (solvent-resistant)
Roll 1-2 times
A two-layer application is advantageous. The durability can be increased by applying a second coat.
When applying with a roller, the surface texture may vary.

Package size

15 kg
Larger containers available on request.