Aqua Hall Marking MB

Application

For the production of permanent markings of lines, areas and symbols (VZ) on bituminous substrates (mastic asphalt, asphalt concrete) and concrete and cement-bound substrates in indoor areas and on already coated surfaces, such as water-based epoxy* and PUR coatings* in indoor areas.

*Test coating required, see Technical Data Sheet, page 3 under Application.

Product properties

» Quick-drying
» Low odour
» High coverage
» Clearly visible
» Load capacity up to max. 1 tonne pallet truck
» Low sensitivity to dirt
» Adding additive R achieves slip resistance class R10

Binder base

Special acrylic

Degree of gloss

Silky matt

Drying

(23°C 60% relative humidity)
Dust-dry: approx. 1 hour
Can be painted over after 2–3 hours
Walkable after approx. 6–8 hours
Fully loadable after drying overnight (at least 12 hours).

The drying time depends on the wet film thickness, temperature, humidity and the material and ceiling temperature. Only open the roadways to traffic after the contractor has checked that they are completely dry.

Spreading rate

Actual consumption depends on the applied layer thickness, the application method and the nature of the substrate.

For more information, see the Technical Data Sheet.

Type of application

Brush, roll or spray.
Use a brush with plastic bristles for painting and a short-pile roller for rolling.
For sprayers, see the Technical Data Sheet.

Shade

White approx. RAL 9016
Yellow approx. RAL1023

Field of application

Indoors

Package size

White: 2.5 l, Yellow: 2.25 l, Base C: 2.25 l