Marking Spray R40

Application

For the production of permanent markings in indoor and outdoor areas of lines and symbols (VZ) on mastic asphalt, asphalt concrete and other bituminous surfaces, as well as on concrete and cement floors.
Very well suited for use on road surfaces, car parks, driveways, hall floors and in safety-relevant areas.
Degree of stress: Up to medium loads (pallet trucks up to approx. 1 t)

Product properties

» Quick-drying
» High coverage
» Clearly visible
» Range: 40 metres with a line width of 10 cm

A special valve for floor applications ensures clean lines. The product can be used in conjunction with the Jansen 4-wheel off-road marking trolley, the 2-wheel marking trolley and the marking gun.

Binder base

Acrylate

Degree of gloss

Silky glossy

Drying

(23°C, 60% relative humidity)
Dust dry: after approx. 10 minutes
Loadable: after 24 hours

The drying time depends on the wet film thickness, temperature, humidity and the material and ceiling temperature. Only open the roadways to traffic after the contractor has checked that they are completely dry.

Spreading rate

750 ml is sufficient for approx. 40 m with a spray width of 10 cm in one spraying pass. Two cans can be clamped directly onto the 4-wheel off-road marking trolley.

Actual consumption depends on the applied layer thickness, the application method and the nature of the substrate.

Type of application

Spray

Shade

White, yellow

Field of application

Indoors, outdoors

Package size

750 ml spray can