Sealing and Isolating Primer HS

Sealing and Isolating Primer HS


Isolating and priming coat for wood branch, wax, tar, smoke, carbon black, grease and nicotine stains. Styrofarm is not etched. Insulates strokes of most felt pens. For priming of absorbent surfaces of gypsum, concrete and fibre cement.

Product properties

Fast-drying with good insulation and sealing effect. Contains anti-skid aggregate for improved roll-over effect.

Binder base

Polymerisate resin

Degree of gloss



(23 °C 60 % rel. air humidity)
Dust-dry: ca. 60 minutes; Touch-dry: ca. 90 minutes; Re-coatable: after 3 – 4 hours; Depending on the thickness of layer, the drying time can vary.

Spreading rate

Approx. 8-10 m²/l per coat

Type of application

Brush, roller with short-pile roller.



Field of application

Exterior , interior

Package size

375 ml, 750 ml, 2,5 l

Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.