2-Component Aqua Multiprimer GH 20
Range of uses
Promotes adhesion on stiff, non-absorbent substrates such as non-ferrous metals, copper, zinc, aluminium, hard plastics, polyester, resopal, tiles, glass, ceramic. Protects against corrosion on iron, steel and galvanized surfaces. Universally recoatable with almost all 1- and 2-component finish-ing coatings. For exterior and interior use.
Excellent adhesion. May be employed to protect against corrosion on: derusted iron, steel and zinc surfaces.
Water-emulsifying 2-component epoxy resin
Degree of gloss
At 20°C and 60% relative air humidity, re-coatable after ca. 3 hours with aqueous and after ca. 16 hours with solvent-based coatings. At low temperatures, the values can fluctuate consider-ably. During the hardening process (ca. 8 hours at 20°C), protect the applied material against dampness as this can otherwise lead to surface damages and losses in adhesion.
Approx. 120-170 g/m² per coat
Type of application
Brush: for painting use brush with synthetic bristles
Roller: for rolling use short-pile mohair roller.
Field of application
1 kg combi-pack = base lacquer 600g + hardener 400 g