ISO-Venti Xtrem

ISO-Venti Xtrem


Good-coverage single-component system for new coats and renovation coats on wooden, plastic and aluminium windows and doors, for dimensionally stable and reasonably dimensionally stable wooden components and zinc surfaces. When used on rigid PVC, aluminium and zinc, no separate bonding agent is required.

Product properties

Diffusible, low water absorption, materials with wood content are isolated, excellent adhesion, good flow, good edge coverage, block-resistant, water-based, creates an impressive surface.

Binder base

Cationic acrylate

Degree of gloss

Semi-matt after drying


(23°C 60% relative humidity)
Dust-dry: After approx. 1 hour
Can be painted over after approx. 6 hours
Fully cured: After approx. 2-3 days
The values can vary greatly depending on temperature and humidity.

Spreading rate

Approx. 120 ml/m² per coat
Determine exact consumption by trial coating.

Type of application

Interior and exterior



Field of application

Brush: Use a brush with plastic bristles.
Roller: Short pile roller, microfibre, e.g. Aqua Felt roller
Spraying: Details see Technical Datasheet

Package size

750 ml, 2.5 l

Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.