Aqua ULTRA-Primer



Aqua ULTRA-Primer

Application

Adhesion-promoting primary coating with isolating effect for further coatings on wood (dimensionally stable, dimensionally stable to a limited degree), wood-based materials, MDF, OSB, gypsum plaster, gypsum boards (can also be used on large surfaces as an insulating wallpaper primer), zinc, aluminium, non-ferrous metals, stainless steel, copper, as well as old acrylic/alkyd resin-based paintwork. Rigid PVC*, anodised aluminium*, glass and ceramic surfaces*, earthenware/tiles*, powder coating* and polyamides*.
Iron and steel can be coated with products from our metal protection range.
Blocks penetration by nicotine residues, wax, tar, smoke, soot and grease stains, as well as dried water stains. Mould stains that are still visible after professional treatment can also be isolated.

NOTE: Do not use alkaline cleaners when pre-cleaning absorbent substrates!

*Please note the instructions for substrate preparation in the Technical Datasheet

Product properties

Extreme adhesion on a wide variety of different substrates. Suitable for large areas. Water-based, low-tension, offers very high yield and excellent isolating effect on many critical substrates.

Binder base

Cationic dispersion

Degree of gloss

Matte

Drying

(23°C, 60% rel. humidity)
Dust-dry: approx. 30 minutes
Touch-dry: approx. 90 minutes
Ready for overcoating after 5-6 hours
Air humidity in excess of 80% extends drying times considerably. It is important to ensure that evaporating water leaves the room as quickly as possible. Coatings that remain damp for too long can continue to draw substances from the substrate.

Spreading rate

8 - 12 m²/l per coating, depending on substrate

Type of application

Brushing: Use a brush with artificial bristles for brushing, such as a Wistoba Krex or Mesko M7 or M10.
Rolling: Use short pile Aqua Felt rollers
Spraying: dilute with up to 10% water.

Shade

White
Light and medium colours can be mixed using the Jansen MIX System

Field of application

Inside and outside

Package size

750 ml, 2.5 l, 9.4 l



Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.