Aqua Insulating and Adhesive primer



Aqua Insulating and Adhesive primer

Range of uses

For priming of absorbent substrates such as wood, gypsum, wallpaper, styrofoam, glass-fibre fabric and old dispersion coatings. Adhesion promoter for non-ferrous metals, glass, old coatings on acrylate and alkyd resin base, hard PVC and tiles (not in areas subject to splashing water).Not to be used outdoors on surfaces exposed to the weather such as pergolas, fences, benches etc. and, after drying, to be immediately reworked. Can also be used inside as colourless coating with Jansen’s patina finish, but by applying only a thin coating with the spray method.

Product properties

Water-based, low odour, with excellent insulating results on many critical substrates. Excellent adhesion also on difficult substrates. High covering power, high degree of whiteness. Insulates wood extractives of coniferous, leaf and tropical woods. Blocks bleeding of nicotine residue, wax, tar, smoke, carbon black and grease stains as well as dried water spots.

Binder base

Cationic dispersion

Degree of gloss

Silk-gloss

Drying

(23 °C   60 % rel. air humidity)
Dust-dry: ca. 30 minutes; touch-dry: ca. 90 minutes; Recoatable after ca. 90 minutes with dispersion paints, after 2 – 3 hours with alkyd resin and acrylic paints.

Spreading rate

Approx. 10 – 12 m²/l per coating, depending on the substrate

Type of application

Brush: for painting use brush with synthetic bristles. Roller: for rolling use short-pile mohair roller. Spray: dilute with max. 10 % water.

Shade

White and colourless

Field of application

Exterior , interior

Package size

375 ml, 750 ml, 2,5 l



Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

The consumption values are approximate values and may vary depending on the nature of the substrate.