ISO-TPL Stair and Parquet Lacquer

ISO-TPL Stair and Parquet Lacquer


For new and renovation coating of stairs as well as parquet and wooden floors (floorboards, OSB, MDF and multi-layer boards) in living areas with normal wear and tear, for interior wooden components such as shelves, tables, furniture and railings. For solid wood and wood-based materials.

Product properties

One-pot system (primer, intermediate and finishing coat), no insulating primer required. Excellent fluidity, odourless, quick-drying (two coats possible in one day), excellent surface finish, colourless variant emphasises the wood grain (enhances the contrast of the wood), highly abrasion-resistant, high durability, high yield, good water resistance, good cleaning resistance. Emission-tested according to the AgBB scheme. Coating resistant to saliva and sweat simulant according to DIN 53 160, part 1 and 2. Tested according to EN 71 part 3. Safety of children's toys. Slip resistance class R11 is an option by adding Additive R. Blocks the penetration of wood ingredients.

Binder base

Special acrylate dispersion

Degree of gloss

Semi-matt, matt


23 °C, max. 60% rel. humidity
Dust-dry: 1 hour
May be painted over: after 3 - 4 hours
If an insulating effect is required, only after 6 - 8 hours.
Full stress capacity: after 3 days
The values may vary considerably, depending on temperature and humidity.

Spreading rate

Normal application rate: approx. 120 ml/m²
Best flow at approx. 150 ml/m²
Final coat with slip resistance approx. 100 ml/m²

Type of application

Brushing: Use a brush with plastic bristles.
Rolling: The roller should be made of a dense microfibre pile. Pile height max. 10 mm, e.g. Wistoba 656225 (orange), or Wistoba 653525.
Spraying: Dilute with up to 10% water, max. wet film thickness: 200 µ.
For more details: See Technical Datasheet


White, similar to RAL 9016
Jansen MIX

Field of application


Package size

750 ml, 2.5 l

Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.