ISO-TLR Door Lacquer Rapid
On new substrates and old coats, wood (all interior woods and wooden composites), zinc sheet doors and surfaces, hard PVC and Resopal without additional primer.
Excellent process, immediately recognisable, also very good with thin layers. Extremely scratch-proof/scrub-resistant, complies with DIN EN-71-3 (2019) and resistant to many common household cleaners. Long open time: Dust-dry within 1 hour (at 23 ° C and 60 % relative humidity). Isolates wood ingredients and water stains. Isolates water-soluble colourings from old veneer glues when combined with ISO Painter's Undercoat. Blocks wax, tar, smoke, soot and grease stains from penetrating, isolates nicotine residue and dried water stains. High block resistance, 2 coatings possible per day, no yellowing. High covering capacity, stable gloss, very good edge covering and very good adhesion to the substrate.
Special acrylate dispersion
Degree of gloss
Semi gloss, matt
(23 °C max. 60% rel. humidity)
Dust-dry: ca. 1 hour. May be coated over: ca. 4-6 hours. Fully resilient: after ca. 2-3 days. These values can vary significantly depending on temperature and humidity.
Ca. 10 – 12 m²/l per coat
Type of application
Brushing: Use a brush with plastic bristles for painting. Rolling: Use a micropore roller. Spraying: Dilute with up to 10% water, max. wet film thickness 200 µ.
White. Miscible with the tinting machine Jansen MIX.
Field of application
Brushing quality: 750 ml, 2.5 litres