Due to the natural disaster, which has hit us as a company and especially our employees and their families very hard, you can contact us only to a very limited extent until further notice.

Thank you for your understanding.

Copper Enamel



Copper Enamel

Application

For rust-inhibitive coatings on iron and steel.

Product properties

Copper Enamel is weatherproof and metallic silk-gloss.

Binder base

Alkyd resin

Degree of gloss

Metallic silk-gloss

Drying

(23 °C 60 % rel. air humidity)
Dust-dry: 6 – 8 hours; Re-coatable: after overnight drying; Through-dried: after 24 hours. The values can fluctuate considerably depending on temperature and air humidity.

Spreading rate

Approx. 13-15 m²/l per coat

Type of application

Brush: Use brush with natural bristles. Roller: Use roller with short-pile mohair roller. Spray: Airless: Pressure ca. 160 bar. Nozzle: 0,28 – 0,33 mm – 0,011 – 0,013 inch. Aircoat: Pressure 80 – 100 bar, Air 1 – 1,5 bar. Nozzle: 0,28 – 0,33 mm – 0,011 – 0,013 inch. High Pressure: Pressure 3 – 5 bar. Nozzle: 1,5 – 2,0 mm. Fine Coat: Pressure ca. 0,48 bar. Nozzle: 1,8 mm.

Shade

Copper and Old Copper

Field of application

Exterior, interior

Package size

125 ml, 375 ml, 750 ml



Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.