Traffic Paint

Traffic Paint


Street marking on bituminous surfaces (mastic asphalt, asphalt concrete), concrete paving (cement concrete) as streets, car parks entrances etc.

Product properties

The coating is fast-drying, clearly visible and with good body. For highly stressed surfaces (heavy goods vehicles or fork-lift trucks) we recommend the use of our Jansen 2-Component Marking Paint. For interior markings, we recommend Jansen Sprint-Line (water-based) or Jansen 2-Component Marking Paint.

Binder base


Degree of gloss



(23°C 60 % rel. air humidity)
Passable: after ca. 30 minutes. In part, considerable deviations during cooler weather, with cold ground, bad ventilation or higher coating thicknesses. Release lanes for traffic only after a complete through-drying.

Spreading rate

3-4 m²/l per coat

Type of application

Brush: Brush with natural bristles. Roller: Use solvent-tolerant roller. Spray: Use a coarse nozzle (ca. 2,5 mm nozzle opening)


White, Traffic yellow ca. RAL 1023, Red ca. RAL 3020, Blue ca. RAL 5017, Black

Field of application


Package size

White: 750 ml, 2,5 l, 5 l and 15 kg net. Also available in 40 kg disposable hobbock (on request)
Coloured: 750 ml, 2,5 l. Traffic yellow also available in 15 kg.

Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.