Aqua floor varnish

Aqua floor varnish


Walkable on wood in living areas with normal stress. May also be used on mineral substrates such as basement floors and stairs, but not under permanently moist conditions.

Product properties

Odourless, highly abrasion resistant, very hard wearing, good resistance to water, resistant to cleaning. Aqua floor varnish may be used in living areas. Single component. Slip resistance class 11 is achieved by adding Additive R (see Technical Data Sheet).

Binder base

PU acrylate dispersion

Degree of gloss



(23°C 60% rel. humidity)
Dust-dry after ca. 2 hours; May be over-coated after ca. 6 hours; Fully dry after 12 hours; Full stress capacity: after 3 days. First wet cleaning and laying of carpets after 5 days.

Spreading rate

Ca. 8 - 10 m²/l per coat

Type of application

Brushing: Use brushes with plastic bristles. Rolling: Use short pile mohair rollers.Dilute with additional 5 – 10% water for spraying and roller application. Apply Aqua floor varnish coatings deftly to avoid accretions. Do not spread too thin. Please note that on combination with additive R, Aqua Floor Varnish will no longer be sprayable.


White; miscible with the tinting machine Jansen MIX.

Field of application


Package size

750 ml, 2,5 l

Consumption Calculator

Please fill in the size of area in sqm:
Average coverage per coat:

Please note the specific weight for kg filling. The information on the specific weight can be found in the technical data sheet under "Density". The consumption values are approximate values and may vary depending on the nature of the substrate.